manualshive.com logo in svg

SATO SG112 ex, Programming Reference Manual

Share
Download
SATO SG112 ex Programming Reference Manual Download Page 209

208

<Q>1 

<Z>

[Coding Example 13]

GS1-128 Composite (CC-C)

<A>

<V>100<H>100 

<EU>120402600030123456789012340|02130123456789

 

093724#101234567ABCDEFG

 

<Q>1 

<Z>

[Supplementary Explanation]

-

Parameter varies depending on one-dimensional barcode type. Segment width can be specified

only for DataBar Expanded Composite (CC-A/CC-B) (EU06). Barcode height can be specified

only for GS1-128 (UCC/EAN-128) (EU11, EU12).

-

If the value is not set to the data portion, composite symbol will not be printed.

-

Parameter for print data is available up to 2361 digits including 1D barcode data and 2D

barcode data as a specification for this command. Available number for 2D barcode data varies

depending on the type of 1D barcode and/or mixture of alphabets and number. When specified

data exceed the maximum digits, barcode may not be printed properly.

-

Entire size of composite symbol changes depending on the specification of narrow bar width.

-

If composite symbol exceeds the printing area, only the portion located within the area will be

printed. Also, a scanner might read the value of such composite symbol occasionally.

-

Height and width of 2D barcode of the composite symbol is adjusted by 1D barcode data size.

When the width of 1D barcode is narrow, it cannot be printed even the size of data is less than

the maximum number of digit.

-

Print of HRI cannot be designated with this command.

-

Rotation <%> is available, and Enlargement <L> is invalid.

-

When specifying 11 (production date), 12 (term of payment), 13 (packing date), 15 (sales

period), 17 (warranty period) for application identifier, set correct data YYMMDD. When the

incorrect date is set, print result is not guaranteed.

-

When specifying GS1 DataBar as a barcode type, specify 2D Barcode data with the format

based on application identifier.

-

GS1 DataBar Expanded Composite (CC-A/CC-B) is stacked automatically by segment width

and data size and printed as GS1 DataBar Expanded Stacked (CC-A/CC-B).

-

Barcode generation module has been modified for improvement. How the generated image

looks may differ due to the change, however the read result is the same.

Summary of Contents for SG112 ex





































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands