SATO SG112 ex, Programming Reference Manual

Page: 28 / 516

27
[ESC+V] Vertical Print Position
ESC V Parameter Hexadecimal code
<1B>
16
<56>
16
aaaaa
Initial value aaaaa=1
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter is valid until the next specification is
made.
Valid range and term of
command
Valid range between items The set parameter becomes initial value at the next item
<A>.
[Function]
Specifying vertical print position from its start point by dot.
[Format]
<V>aaaaa
- Parameter
a [Vertical Print Position] = Refer to [Initial Value and Valid Range of Parameter] section below.
[Coding Example]
Vertical print position: 100 dots
<A>
<V>100 <H>200<P>2<L>0202<XM>ABCD
<Q>2
<Z>
[Supplementary Explanation]
- Specifying the start of vertical position for the print of text, barcode, ruled line and graphics.
[Points]
- Any contents such as text, barcode, graphic exceed printing area will not be printed.
[Initial Value and Valid Range of Parameter]
Initial value: 1
Valid range: 1 to 5040 dots