SATO SG112 ex, Programming Reference Manual

Page: 341 / 516

340
[ESC+YS] Format Registration
ESC YS Parameter Hexadecimal code
<1B>
16
<59>
16
<53>
16
,aaa
Initial value None
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter is valid until the next specification is
made.
Valid range and term of
command
Valid range between items The set parameter is valid until the next specification is
made.
[Function]
Registering print format.
[Format]
<YS>,aaa
- Parameter
a [Format registration number] = Valid Range : 1 to 999
[Coding Example]
<A>
<CC>1
<YS>,1
</N>,3,3
<%>0<V>100<H>200<P>2<L>0101<XM>ABC
<Z>
[Supplementary Explanation]
- When registering multiple formats, Delimit Start Code <A> and Stop Code <Z> with one format.
- Specify Card Slot for Use <CC> prior to this command <YS> by all means.
- Use this command and Registration of Field </N> as a pair.
- Attempts to re-register with registered No., error will occur, and the targeted content will be
printed.
- The error occurs when specifying unused or specifying the slot which this product is allocated.
[Notes]
- Do not power off this product when accessing to the memory. When this product is turned off
while memory accessing, the data in the accessed media may be corrupted.
- The maximum registration with </N> is 99 fields. (Refer to [ESC+/N] Registration of Field for the
commands can be registered.)
- The maximum registration with other than </N> is 50 fields. Refer to [Available registration
command] below for the commands can be registered.