manualshive.com logo in svg

SATO SG112 ex, Programming Reference Manual

Share
Download
SATO SG112 ex Programming Reference Manual Download Page 291

290

-

When Micro PDF is specified by PDF type, number per symbol is specified by number of data

codeword per line, and accordingly maximum number of data digit is specified. For details, refer

to "Symbol size and number of data of MicroPDF417" below.

-

When specifying Micro PDF by PDF code type, security level is disabled.

[Points]

-

Sequential number is not available.

-

Specifying print position by automatic line feed is not available.

-

Print 00H to FFH is available.

-

Format registration is available.

-

Enlarging minimum module size improves print quality.

-

Increasing security level improves read rate.

-

Print height varies depending on the character such as numeric only, alphabet only or mixture of

numeric and alphabets.

[Notes]

-

This command is for the compatibility with previous one.

　

Summary of Contents for SG112 ex





































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands