SATO SG112 ex, Programming Reference Manual

Page: 223 / 516

222
Automatic setup (Data setup mode)
<DN>mmmm,n...n : Change input mode automatically according to input data.
- Parameter
k [Input mode]
1 : Numeric mode
2 : Alphanumeric mode
3 : Kanji mode (Shift JIS Kanji code)
* Specify only when specifying Manual setup in Data setting mode.
* There is binary specification other than above, but data specification command is different.
m [Number of data] = Valid Range : 1 to 2953
* Specify when specifying Automatic setup in Data setting mode or specifying binary specification
in Manual setup.
n [Print data] = Data
[Format] (version)
<QV>pp : Use when specifying the version.
- Parameter
pp [Version] = 00 to 40 (MODEL2)
* This setting is used when fixing the size of QR symbol with the version command. When
not specified, it becomes Auto. Specifying 00 also becomes Auto. It does not become a parameter
error from 00 to 40.
* Refer to “[ESC+QV] QR code version” for details.
[Supplementary Explanation1]
- When specifying Kanji in <DN>, specify size that is 2 x number of Kanji characters.
- For <DN> in Automatic setup, when 80H to 9FH and E0H to FFH is specified as data, it is
handed as Kanji mode, and cannot specify them as binary.
[Coding Example 1]
Error correction level: 7%, Size of one side of cell: 05, Data setup mode: Manual setup,
Concatenation mode: Normal
<A>
<V>100<H>200 <2D30>,L,05,0,0
<DS>1,012345
<Q>2
<Z>
[Supplementary Explanation2]
- If the parameter other than the description is specified or number of print data does not match,
printing is not performed.
- Data specification command in data part varies according to parameter setup or specified data.
[Coding Example 2]
Error correction level: 7%, Size of one side of cell: 04, Mixed specification of Manual setup (Data
setup mode)