manualshive.com logo in svg

SATO SG112 ex, Programming Reference Manual

Share
Download
SATO SG112 ex Programming Reference Manual Download Page 425

424

[Example]

STX SOH CAN 00001 ETX
STX SOH CAN ***** ETX

　

[Supplementary Explanation]

-

This command shall not be used while sending other data like print data.

-

Upon reception of this command, this product will search the specified item from the history

buffer, and it may take some time to cancel.

-

Item No. that is not sent as the print data shall not be specified as the parameter of this

command. This product is not being able to cancel the item. In addition, this product is not being

able to cancel the item when specifying an illegal item No. The control of item No. shall be done

at the host.

-

Please note that there is no return data for this command. Host will send item acquiring

command (SOH+ENQ) so please check the result by checking the return status.

-

Item No. that is not sent as the print data shall not be specified as the parameter of this

command. This product is not being able to cancel the item. In addition, this product is not being

able to cancel the item when specifying an illegal item No. The control of item No. shall be done

at the host.

Print End Request Command

This command stops printing operation.

　

[Command]

SOH(HEX 01H) + DLE(HEX 10H)

　

[Format]

STX + DLE

　

[Example]

STX DLE

　

[Supplementary Explanation]

-

This command shall not be used while sending other data like print data.

-

Please note that there is no return data for this command. Host will send item acquiring

command (SOH+ENQ) so please check the result by checking the return status.

Print Start Request Command

This command cancels print operation in hold, which was stopped by print stop command (SOH

+DLE), then resume printing operation.

　

[Command]

SOH(HEX 01H) + DC1(HEX 11H)

　

[Format]

STX + SOH + DC1 + ETX

Summary of Contents for SG112 ex





































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands