SATO SG112 ex, Programming Reference Manual

Page: 52 / 516

51
[ESC+WD] Partial Copy
ESC WD Parameter Hexadecimal code
<1B>
16
<57>
16
<44>
16
VaaaaaHbbbbYcccccXdddd
Initial value None
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Copying specified area to another place.
[Format]
<WD>VaaaaaHbbbbYcccccXdddd
- Parameter
a [Vertical start point of original data] = Valid range: Refer to [Valid Range] section below.
b [Horizontal start point of original data] = Valid range: Refer to [Valid Range] section below.
c [Vertical dot size of original data] = Valid range: Refer to [Valid Range] section below.
d [Horizontal dot size of original data] = Valid range: Refer to [Valid Range] section below.
[Coding Example]
Vertical start point of original data: 50, Horizontal start point of original data: 50,
Vertical dot size of original data: 200, Horizontal dot size of original data: 400
<A>
<V>50<H>50<P>2<L>0202<XU>ABCD
<V>300<H>100
<WD>V50H50Y200X400
<Q>2
<Z>
Ａ ＡＢ ＢＣ ＣＤ Ｄ
Ａ ＡＢ ＢＣ ＣＤ Ｄ
aaaaa
bbbb
ccccc
dddd
La
be
l fe
ed
d
ire
ctio
n
Dotted line part indicates the copied area.
Actual print portion is "ABCD."
[Supplementary Explanation]
- To locate the destination of copy, specify Vertical Print Position <V> and Horizontal Print
Position <H> prior to this command.
- Destination of copy has to be outside of specified original data.
- When the print start position of the copied area is outside of printing area, printing will not be
performed due to command error.