SATO SG112 ex, Programming Reference Manual

Page: 483 / 516

482
Connector pin assignment
See below for the connector pin assignment of Centronics standard (compatible mode).
When IEEE1284 standard connector is used, connection complies with IEEE1284-B type connector.
Pin no. Signal name Contents Pin no. Signal name Contents
1 STROBE Input 19 STROBE-RETURN
2 DATA 1 Input 20 DATA 1-RETURN
3 DATA 2 Input 21 DATA 2-RETURN
4 DATA 3 Input 22 DATA 3-RETURN
5 DATA 4 Input 23 DATA 4-RETURN
6 DATA 5 Input 24 DATA 5-RETURN
7 DATA 6 Input 25 DATA 6-RETURN
8 DATA 7 Input 26 DATA 7-RETURN
9 DATA 8 Input 27 DATA 8-RETURN
10 ACK Output 28 ACK-RETURN
11 BUSY Output 29 BUSY-RETURN
12 PE Output 30 PE-RETURN
13 SELECT Output 31 INIT Input
14 AUTOFD Input 32 FAULT Output
15 33
16 LOGIC GND 34
17 CHASSIS GND 35
18 PERIPHERAL LOGIC HIGH Input 36 SELECTION Input