SATO SG112 ex, Programming Reference Manual

Page: 410 / 516

409
Return Status
The purpose of return status is to manage the status of this product from the host, and this product
returns the status by request command from host.
There are four types of return status format, Status2, Status3, Status4, and Status5. Each return
status is listed below.
The product returns the status after receiving request command.
Communication
protocol
Command Command Name Data Port Sub Port
ENQ Status Request Command ○ ○ Status2
CAN Cancel Request Command ○ ×
ENQ Status Request Command ○ ○ Status3
CAN Cancel Request Command ○ ×
ENQ Status Request Command ○ ○
CAN Cancel Request Command ○ ×
DLE Print End Request Command ○ ×
Status4
DC1 Print Start Request Command ○ ×
SOH + ENQ Status Request Command ○ ○
SOH + CAN Cancel Request Command ○ ×
SOH + DLE Print End Request Command ○ ×
Status5
SOH + DC1 Print Start Request Command ○ ×
SOH + MG Print Configuration Request ○ ○
SOH + SB System Version Information Request ○ ○
SOH + EB Free Memory Space Information
Request
○ ○
SOH + FO Form Overlay Information Request ○ ○
SOH + CR Status5 Setting Information Request ○ ×
SOH + LW Status5 History data Information
Request
○ ×
Status3
Status4
Status5
SOH + LA LAN Information Request ○ ×
○：
supported,
×：
not supported
Remarks
When you acquire return status from this product, please input transmission interval time after
sending each command to this product.
Command Command Name Transmission interval
time (target value)
ENQ (05H) Status request 1 ms or more
CAN (18H) Cancel request
DLE (10H) Print end request
DC1 (11H) Print start request
500 ms or more