SATO SG112 ex, Programming Reference Manual

Page: 39 / 516

38
line pattern: F0F0F0F0
4 dots
4 dots
<A>
<V>100<H>200
<FW>04H400PF0F0F0F0
<V>300<H>200
<FW>0808V300H400PF0F0F0F0
<Q>2
<Z>
[Supplementary Explanation]
- When the print start position exceeds the printing area, printing will not be performed due to
command error.
- Set line width to 2 dots or more so the horizontal line width is more than 0.166 mm.
- If setting the vertical line width wider, it will be widened to the right side against media feed
direction. If setting the horizontal line width wider, it will be widened to the lower side against
media feed direction.
- If setting the grid line wider, it will be widened inward.
- Please specify 8 digits bit pattern for the ruled line. (1 digit = 4 bits, 1 bit = 1 dot)
- When the ruled pattern is less than 8 digits, data are generated repeatedly from the specified
data until it becomes 8 digits data.
Example) When ruled line pattern "FOC" is specified, ruled line pattern "FOCFOCFO" is
generated.
- When a pattern is specified, the image is generated in 4 bytes of the drawing area. When the
print base reference point is not in 4 bytes, the image is misaligned for 1 dot because the data
are generated from in the middle of the pattern.
[Valid Range]
Horizontal line length: 1 to 3200 dots
Vertical line length: 1 to 5040 dots