SATO SG112 ex, Programming Reference Manual

Page: 124 / 516

123
[ESC+KB] 32 x 32 dots Kanji in Horizontal Line with 1-byte
Character
ESC KB Parameter Hexadecimal code
<1B>
16
<4B>
16
<42>
16
an...n
Initial value None
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifying 32 x 32 (width x height) dots horizontal written Kanji character print and W16 x H32 dots
half size character in horizontal line.
[Format]
<KB>an...n
- Parameter
a [Kanji selection mode]
H: HEX characters
B: Binary code
I: HEX characters, smoothing function
C: Binary code, smoothing function
J: HEX characters, highlighting function
D: Binary code, highlighting function
K: HEX characters, smoothing and highlighting function
E: Binary code, smoothing and highlighting function
n [Data] = Print data. Refer to Kanji code (ESC+KC) command for the available character codes.
[Coding Example]
Shift JIS HEX characters, Data:
株式会社ｻﾄ-
<A>
<KC>1
<V>100<H>200<P>2<L>0305
<CC>0
<KB>H8A948EAE89EF8ED0BBC4B0
<Q>2
<Z>
[Supplementary Explanation]
- HEX characters = Kanji Code 4 bytes ASCII / 1 Kanji character
- Binary code = Kanji Code 2 bytes / 1 Kanji character
- Smoothing function validity range = Horizontal/vertical valid range: factor 3 to 12
- Highlighting function validity range = Horizontal/vertical valid range: factor 1 to 5
- Unicode data includes control codes. To print correct codes, specify HEX character in Kanji
mode.