SATO SG112 ex, Programming Reference Manual

Page: 290 / 516

289
[ESC+BK] PDF417 (Compatible command)
ESC BK Parameter Hexadecimal code
<1B>
16
<42>
16
<4B>
16
aabbcddeeffffg...g(,h)
Initial value None
When the power is OFF The set parameter is not maintained.
Valid range within items The set parameter becomes invalid.
Valid range and term of
command
Valid range between items The set parameter becomes invalid.
[Function]
Specifying PDF417.
[Format] (Setup part)
<BK>aabbcddeeffffg...g(,h)
- Parameter
a [Minimum module width] = Valid range : 01 to 09 dots
b [Minimum module height] = Valid range : 01 to 24 dots
c [Security level] = Valid range : 0 to 8
d [Number of data code words per digit]
Valid range : 01 to 30
00 : Automatic (Width varies depending on the number of data specified)
e [Digit number per symbol]
Valid range : 03 to 90
00 : Automatic (Height varies depending on the number of data specified)
f [Digit number of data] = Valid data : 0001 to 2681
g [Print data] = Data
h [PDF code type]
When omitted : PDF417
T : Truncated scale
M : Micro PDF
[Coding Example]
Minimum module width: 03 dots, Minimum module height: 09 dots, Security level: 3, Number of data
code words per line: 03, Number of line per symbol: 18
<A>
<V>100<H>200
<BK>0309303180010PDF1234567
<Q>2
<Z>
[Supplementary Explanation]
- Minimum module width can be set to 01 and 02; the read, this may not be read properly.
- Minimum module height can be set to 01, 02 and 03; the read, this may not be read properly.
- When d=e=00, aspect ratio will be at 1:2 based on the number of print data.
- When specifying security level high, parameter d or e should have large number.
- Maximum number of digit of data is 2681, but it varies depending on Minimum module size,
Security level and type of print data.
- When parameter d and e does not match number of data, print may not be performed properly.