SATO SG112 ex, Programming Reference Manual

Page: 422 / 516

421
Digit Contents ASCII HEX
Online - Waiting (Wait for dispense) 3 33
Online - Analyzing / Editing
* [Number of processing item to be printed] may not be set, which is
depending on the timing.
4 34
Error 5 35
Stop printing (Receiving DLE command) 6 36
Digit Contents ASCII HEX
NO ERROR 0 30
RIBBON NEAR END 1 31
BUFFER NEAR FULL 2 32
RIBBON NEAR END & BUFFER NEAR FULL 3 33
MACHINE ERROR A 41
FLASH ROM ERROR B 42
HEAD OPEN C 43
PAPER END D 44
RIBBON END E 45
SENSOR ERROR F 46
HEAD ERROR G 47
MEMORY READ/WRITE ERROR H 48
MEMORY FULL I 49
KANJI DATA ERROR L 4C
BCC ERROR Q 51
ITEM NO. ERROR R 52
MEDIA ERROR (PRINT ERROR) S 53
2
OTHER ERRORS U 55
[Example]
STX SOH ENQ 00001 ETX
STX SOH ENQ ***** ETX
[Supplementary Explanation]
- This command shall not be used while sending other data like print data. Status would not be
returned properly or print would not be performed properly if this command is sent while sending
print data.
- Upon reception of this command, this product will search the specified item from the history
buffer, and it may take some time to return the status to the host.
- Item No. that is not sent as the print data shall not be specified as the parameter of this
command. In this case, the status will not be returned. In addition, the status will not be returned
when the specifying an illegal item No. The control of item No. shall be done at the host.