SATO SG112 ex, Programming Reference Manual

Page: 145 / 516

144
[Points]
- With the highlighting function the character width enlarges proportional with the expansion
factor.
- Using the highlighting function, depending on the type of font, characters become squeezed.
- This command is not available for JIS code print data.
- For the half size character (1-byte character code), printing will be performed in W16 x H32
dots.
- For the full size character (2-byte character code), printing will be performed in W32 x H32 dots.
- When the Kanji mode setting is [China, Simplified Chinese (GB18030)] or [China, Traditional
Chinese (BIG5)], it will be a command error.
[Notes]
- When half-sized character with voiced/P-sound consonant mark is specified, each part of
character appears as a single character.
e.g.) When the word
"ﾊﾞｰ"
is specified, it will be written separately such as "
ﾊ
", "
ﾞ
", "
ｰ
".
[Valid Commands]
Print Position <V> <H>
Modification <P> <L> <%> <&> </> <0> <WD>