manualshive.com logo in svg

SATO SG112 ex, Programming Reference Manual

Share
Download
SATO SG112 ex Programming Reference Manual Download Page 57

56

[Supplementary Explanation]

-

When the parameter "aaaa" and "bbbbb" are not specified, all print data specified prior to this

command will be rotated.

-

Data outside of printing area will not rotate.

-

If specifying this command for the item that does not contain print data, the command error will

occur.

-

This command cannot be used in combination with the commands that associated with reedition

of print data. Refer to the invalid commands list below. When the command that cannot use in

combination with is specified, print result is not guaranteed.

-

This command cannot be used in combination with some registration commands. Refer to

the invalid commands list below. When the command that cannot use in combination with is

specified, print result is not guaranteed.

-

This command cannot be used in combination with some of the modification commands. Refer

to the invalid commands list below. When the command that cannot use in combination with is

specified, print result is not guaranteed.

-

This command prints the mirror image of the print data put before the mirror rotation command

is specified. The data after the command does not rotate. Note that specifying this command

several times results rotating the data several times.

-

When the mirror image is applied for the barcode, reading of the barcode and the head damage

check are not guaranteed.

-

When executing the mirror image, the head damage check will be performed for all the areas

where rotated.

[Valid Range for mirror rotation]

Horizontal range of mirror rotation: 8 to 3200 dots
Vertical range of mirror rotation: 8 to 3600 dots

[Invalid Commands]

Command that

associated with

reediting.

<WD>

<F>

<(>

<0>

<WA>

 

 

 

 

 

Registration

<GI>

<GT>

<PI>

 

 

 

 

 

 

 

Modification

<%>

 

 

 

 

 

 

 

 

 

Summary of Contents for SG112 ex





































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands