manualshive.com logo in svg

SATO SG112 ex, Programming Reference Manual

Share
Download
SATO SG112 ex Programming Reference Manual Download Page 176

175

-

For print data of each barcode type, refer to the code tables of barcode.

[Notes]

-

If the value other than valid range is set, command error will occur and barcode will not be

printed.

-

A barcode that exceeds the printable area will not be printed.

-

Increasing narrow bar width may exceed the printing area and may not be printed.

-

Scanner may not read the barcode with valid character pitch when Character Pitch <P> is

increased. Also, increasing the narrow bar width may cause the same type of problem. For

more information, refer to the documentation of your scanner.

-

Set narrow bar width to 2 dots or more.

-

Adjust Print Speed <CS> or Print Darkness <#F> if there is a problem in barcode reading.

-

Matrix 2of5 will be expressed as Coop2of5/NEC2of5.

-

If Start/Stop character is not included in print data at the time of CODABAR(NW-7) or CODE39

specified, barcode will be printed; however, scanner cannot read it.

-

If sending the print data including check digit at the time of JAN/EAN-13 or JAN/EAN-8

specified, set the correct calculated value. Barcode will be printed even when the data includes

improper check digit; however, scanner cannot read it.

Summary of Contents for SG112 ex





































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands