SATO SG112 ex, Programming Reference Manual

Page: 426 / 516

425
[Example]
STX SOH DC1 ETX
[Supplementary Explanation]
- This command shall not be used while sending other data like print data.
- Please note that there is no return data for this command. Host will send item acquiring
command (SOH+ENQ) so please check the result by checking the return status.
Status5 Return Error Cancellation Request Command
This command cancels Item No. error or BCC error and resume printing operation from the item with
error.
[Command]
SOH(HEX 01H) + SUB(HEX 1AH)
[Format]
STX + SOH + SUB + a + ETX
a
[Cancel]
0 : Cancel error data
1 : Print error data
[Example]
STX SOH SUB 0 ETX
[Supplementary Explanation]
- Do not include this command to print data (<A>-<Z>).
- Please note that there is no return data for this command. Host will send item acquiring
command (SOH+ENQ) so please check the result by checking the return status.
Starting Item No. Specifying Command
This is a command to notify the item No. of the first print data to be sent to this product. This product
regards the value of the item No. specified by this c 1 as the item No. of print data sent
afterwards.
[Command]
<IQ>
[Format]
<IQ>aaaaa
- Parameter
a [Item No.] Valid range
：
00000 to 99999 (necessary to put all 5 digits)
[Example 1]
<A>