SATO SG112 ex, Programming Reference Manual

Page: 308 / 516

307
[ESC+A3] Base Reference Point
ESC A3 Parameter Hexadecimal code
<1B>
16
<41>
16
<33>
16
VabbbHcddd
Initial value a=+,b=000,c=+,d=000
When the power is OFF The set parameter is maintained.
Valid range within items The set parameter is valid until the next specification is
made.
Valid range and term of
command
Valid range between items The set parameter is valid until the next specification is
made.
[Function]
Changing the start point coordinate. This is set in "Settings" mode of this product (normally).
[Format]
<A3>VabbbHcddd
- Parameter
a [Vertical start point correction sign] = +, - (Omissible)
b [Vertical start point correction (Number of dots)] = 0 to 792 (dots)
c [Horizontal start point correction sign] = +, - (Omissible)
d [Horizontal start point correction (Number of dots)] = 0 to 792 (dots)
[Coding Example]
<A>
<A3>V+10H+10
<Z>
b
d
New start point
Original start point
Fe
ed
d
ire
ctio
n
[Supplementary Explanation]
- If changing start point correction and being located outside of printing area, printing may not be
performed.
- When changing start point correction through multiple label formats, correction will affect all of
the formats.
[Points]
- This command is effective prior to the "Settings" mode settings of this product.