Operating Instructions Cubis
®
MCE
49
Operation
8.3 Preparing Weighings
The device must be prepared before every weighing.
Requirements
The device is ready for use
NOTICE
Chemicals may damage the device or accessories!
Chemicals can attack the device or the connected accessories internally
and externally. This may damage the device and accessories.
t
Use appropriate containers when weighing chemicals.
Procedure
t
Level the device.
t
Zero the device for calibration. To do so, press the [Zero] key.
t
If the device
cannot
be zeroed: Remove the sample to be weighed and
re-zero the device.
t
Calibrate the device.
8.4 Weighing
Procedure
t
Zero the device.
t
If necessary, place a container for the sample on the device.
t
To compensate the weight of the container: Tare the device. To do so,
press the [Tare] key.
t
If a container is used for the sample: Place the sample in the container.
t
If
no
container is used for the sample: Place the sample on the weighing
pan.
t
Once the weight value no longer changes and the weighing unit is
displayed: Read off the measured value.
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...