28
Operating Instructions Cubis
®
MCE
Installation
t
Carefully pull the connection cable between the control unit and the
weighing module (1) out of the control unit’s retainer and unroll it.
t
Turn the device over and place it on an even surface.
5.5 Preparing Below-cell Weighing
Samples that
cannot
be placed on the weighing pan can be mounted to the
device base and weighed using the below-cell weighing equipment.
In legal metrology:
−
Do
not
use the below-cell weighing equipment.
−
Do
not
open the cover of the below-cell weighing equipment.
Tool
:
1 suitable screwdriver
Material:
1 hook, available as accessories at Sartorius
1 soft support base
Requirements
The weighing pan and all associated components are
not
placed on the
device, e.g. shield ring, pan support.
Procedure
t
Turn over the device and place on a soft surface.
1
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...
