Sartorius Cubis MCE11201S, Operating Instructions Manual

Page: 21 / 79

Operating Instructions Cubis
®
MCE 21
Operating Concept
Level 1 Level 2 Level 3 Description
DEVICE MOTION.S.
“Motion sensor” CONTROL Activate | deactivate the motion sensor.
NUM.GEST.
“Number” Define the number of possible gestures.
LEFT CMD. Define the function for the left gesture.
RIGHT.CMD. Define the function for the right gesture.
UP.CMD. Define the function for the up gesture.
DOWN.CMD. Define the function for the down gesture.
EXTRAS MENU Lock or unlock the menu’s configuration parameters.
SIGNAL Set or deactivate the acoustic signal.
KEYS Activate | deactivate the key lock.
ON MODE
“Switch-on and
switch-off options” Configure the device’s switch-on and switch-off
options, e.g. switch between standby mode and
operating mode.
LIGHTING Activate | deactivate the lighting for the operating
display.
DATA.OUTP.
“Data output” COM. SBI
“SBI
communication” COM.OUTP. Configure the automatic data output.
STOP.AUTO Define whether the automatic data output can be
stopped and started with the [Print] key.
AUTO.CYCL.
“Time-dependent
interval” − Define an interval for the automatic data output.
FORMAT Define the data output format (characters per line).
AUTO.TARE Activate | deactivate automatic taring after the
printout.
PRNT.PARA.
Printout and PC
direct transfer
settings ACTIVATE
“Triggers” Define whether the printout or PC direct data output
takes place with or without balance stability.
FORMAT Define the format for the printout (characters per
line).
PRT.INIT.
“Initializing” Define the settings for printer initialization.
GLP Define the settings for the GLP printout.
TAR./PRT.
“Tare / print” Activate | deactivate automatic taring after every
print process.
TIME Define the time format.
DATE Define the date display format.
PC.DIRECT
Direct transfer of
data (PC)
DEC.SEPAR. Define the decimal separator character.
OUTP.FORM. Define the output format for the data exchange
between the balance and the PC.