32
Operating Instructions Cubis
®
MCE
Getting Started
6.3 Connecting the Power Supply
Procedure
t
WARNING
Severe injuries caused by using a defective power supply
cable!
Check the power supply cable for damage, e.g., cracks in the insulation.
t
If required: Contact Sartorius Service.
t
Check whether the country-specific power plug matches the power
connections at the installation site.
t
If required: Contact Sartorius Service.
t
NOTICE
Damage to the device due to excessive input voltage! Check
whether the voltage specifications on the AC adapter match those of the
power supply at the installation site.
t
If the input voltage is too high: Do
not
connect the device to the
power supply.
t
Contact Sartorius Service.
t
Connect the mains plug of the power supply cable to the wall outlet at
the installation site.
y
The [BOOTING] display appears in the operating display.
y
The device performs a self-test.
y
The device performs an initial tare function.
6.4 Attaching the Protective Caps
If connections of the device are
not
being used during operation,
the connections must be sealed with the protective caps supplied.
Procedure
t
Check whether all unused connections have been sealed with
a protective cap.
t
Attach the protective caps (1) for any unused electrical connections.
1
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...
