Sartorius Cubis MCE11201S, Operating Instructions Manual

Page: 22 / 79

22 Operating Instructions Cubis
®
MCE
Operating Concept
Level 1 Level 2 Level 3 Description
APPLIC.
“Applications” WEIGH
(Factory setting)
UNIT Activate | deactivate the “Toggle between weight
units” function for all applications.
COUNT RESOLUT. Define the display of the weight value for the
“Counting” application.
REF.UPDT.
“Reference
updating” Activate | deactivate automatic reference updating
for the “Counting” application.
PERCENT
“Weighing in
percent” DEC.PLCS
“Decimal places” Define the number of decimal places for the
“Weighing in percent” application.
NET-TOTL.
“Net-total” COMP.PRT.
“Component
printout” Activate | deactivate the component printout for
the |“Net-total” application.
TOTAL
“Totalizing” COMP.PRT.
“Component
printout” Activate | deactivate the component printout for
the “Totalizing” application.
ANIMALW.
“Animal weighing” ACTIVITY
“Animal activity” Define the level of activity of the sample for the
“Animal weighing” application.
START Define the trigger for starting the animal weighing.
CALC.
“Calculation” METHOD Define the method of calculation for the
“Calculation” application.
DEC.PLCS
“Decimal places” Define the number of decimal places for the
“Calculation” application.
DENSITY
“Density
determination” DEC.PLCS
“Decimal places” Define the number of decimal places for the
“Density determination” application.
STATIST.
“Statistics” COMP.PRT.
“Component
printout” Activate | deactivate the component printout for
the “Statistics” application.
TAR./STAT.
“Tare / statistics” Activate | deactivate automatic taring for the
“Statistics” application.
UPDATE Start a firmware update. The menu is only available
if a USB mass storage device is connected.
INPUT ID NO. Save the entered ID number for the device.
LOT ID − Activates | deactivates the printout of a line for
the LOT ID in the GLP printout.
− The LOT-ID can be entered in writing in the line.
DATE Set the date.
TIME Set the time.
USER.PASS. Set the user password.
DEL.PASS. Delete the user password. The menu is only
available if a user password is set.
SERV.PASS. Activate the service mode.