64
Operating Instructions Cubis
®
MCE
Decommissioning
11 Decommissioning
11.1 Decommissioning the Device
Procedure
t
Turn the device off.
t
Disconnect the device from the power supply.
t
Disconnect the device from all connected devices and all accessories,
e.g. printeror electronics module.
t
Clean the device (see Chapter “9.2 Cleaning the Device”, page 58).
t
Re-insert all components into the device (see Chapter “9.1 Preparing the
Device”, page 58, Chapter “9.3 Assembling and Connecting the
Device”, page 59).
t
If below-balance weighing has been set up:
t
Turn the device on its side and place it on a soft support base.
t
Remove the hook for below-balance weighing from the thread.
t
Re-insert the cover of the below-balance weighing equipment (1).
t
Place the device on the device base on a level surface.
12 Transport
12.1 Transporting the Device
Procedure
t
Only lift the device by its base.
t
When lifting and transporting, ensure that
no
personnel or objects are
in the way.
t
Get help from additional persons when lifting and transporting the
device.
t
Use suitable conveyance devices, e.g., trolleys, for long transport routes.
1
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...
