Operating Instructions Cubis
®
MCE
33
System Settings
7 System Settings
7.1
Performing System Settings
Default settings can be adjusted for the device and the applications in order
to align with the ambient conditions and individual operating requirements.
The following settings are necessary to operate the device together with
connected components:
−
Set up the communication of the connected devices
−
Set up additional components
The following settings are recommended to set up the device:
−
Set the menu language
−
Set the behavior of the isoCAL function
− Set the behavior of the motorized draft shield (only for devices with a
motorized draft shield)
Procedure
t
Press the [Menu] button.
t
Open the desired settings menu.
t
To adjust settings: Open the desired main menu and submenu.
t
Select and confirm the desired configuration value (configuration values,
see Chapter “7.3 Parameter List”, page 34).
t
Exit the menu.
y
If settings have been adjusted in the “SETUP”, “DEVICE”, “DATA.OUTP.”
or “APPLIC.” menu: The [BOOTING] display appears in the operating
display and the device restarts.
7.2 Switching Off the isoCAL Function
If the isoCAL function is switched off for a conformity-assessed device,
the device can only be used for legal-for-trade applications in restricted
temperature ranges (see Chapter “15.3.2 Ambient Temperature for the
isoCAL Function”, page 69). The isoCAL function cannot be switched
off for all model versions.
Procedure
t
In the “SETUP” / “BALANCE” menu, for select the “OFF” configuration
value for the “ISOCAL” parameter.
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...
