42
Operating Instructions Cubis
®
MCE
System Settings
Parameters
Setting values
Explanation
PRINT.INIT
OFF
Deactivates the output of the application parameters.
ALL*
Print command prints all parameters.
MAIN PAR.
Print command only prints the main parameters.
GLP
OFF*
Deactivates the GLP printout.
CAL.-ADJ.
Activates the GLP printout for all calibration and adjustment processes.
ALWAYS
The GLP printout is always switched on. All printouts contain a GLP header
and a GLP footer.
TAR./PRT.
OFF*
Deactivates automatic taring after printer output.
ON
Automatically tares the device after every printout.
TIME
24H*
Sets the time to 24-hour mode.
12H
Sets the time to 12-hour mode (AM | PM). Locked when date format
YYYY.MM.DD (ISO) is activated.
DATE
DD.MMM.YY*
Sets the date display format to DD.MMM.YY
MMM.DD.YY
Sets the date display format to MMM.DD.YY
YYYY.MM.DD
Sets the date display format to YYYY.MM.DD (ISO).
* Factory setting
Parameters in the “PC Direct Transfer” Submenu
Parameters
Setting values
Explanations
DEC.SEPAR.
DEC.POINT*
Sets a point as a decimal separator.
DEC.COMMA
Sets a comma as a decimal separator.
OUTP.FORM.
TEXT+NUM.*
Exports text and numbers.
ONLY NUM.
Only exports numbers.
* Factory setting
7.3.4 Parameters in the “Applications” Main Menu
Parameters in the “Weighing” Submenu
Parameters
Setting values
Explanation
UNIT
ON*
Activates the “Toggle between weight units” function.
OFF
Deactivates the “Toggle between weight units” function.
* Factory setting
Summary of Contents for Cubis MCE11201S
Page 2: ......
Page 78: ...78 Operating Instructions Cubis MCE Conformity...