![background image](http://html.mh-extra.com/html/cdn/sd1102/sd1102_operating-instructions_2576711001.webp)
Model: SD1102
Digital Glass Scale
11 pounds/5 kilograms/176 ounces/5 liters
by pounds, grams, ounces and milliliters
Features
• Tare function
• Tempered glass
• Selectable units
• Overload indication
• Battery status indication
• On/off button
• Auto-off after 30 seconds
• Battery and instructions included
Note:
In the following instructions, names of the control
buttons are shown in CAPS. Function information that
appears on the display is shown in
BOLD CAPS
.
Battery Installation
Replace battery when LCD becomes dim.
LO
appears
on the display when battery status is low and needs to
be replaced.
1. Power off the unit before installing the battery.
2. Remove battery cover on the back by pressing
the latch in and lifting up.
3. Install one CR2032 Lithium battery with positive
(+) side up.
4. Replace the battery cover until it clicks shut.
Operating Instructions
Place the scale gently on a hard and flat surface and
make sure it is steady before use to obtain accurate
measurements.
A. On/Off
1. Press the ON/TARE button to turn on.
2. Press the ON/TARE button for 2 seconds to turn off.
B. Auto Off
The scale automatically turns off after 30 seconds
of inactivity.
C. Unit Selection
Press the UNIT button to to select the desired unit.
The display cycles through
lb
,
oz
,
ml
and
g
.
D. Tare
The tare function resets the scale display to zero
in order to measure only the weight of an item. It is
frequently used to subtract the weight of containers.
1. When the scale is on, place a container on
the platform.
2. Gently press the ON/TARE button to reset the
display to zero.
TARE
appears on the left of the
display and
0.0 oz
appears in the main area
of the display.
3. Place the item into the container or directly on
the scale platform. The weight of only the last
item added will appear on the display.
4. Continue to repeat steps 2 and 3 to measure
the respective weights of additional items. When
all the items are removed from the platform, the
total weight of all items appears on the display.
5. To clear the tare, remove all items from the
platform and gently press the ON/TARE button.
TARE
disappears from the left of the display and
0.0 oz
appears in the main area of the display.
E. Error Messages
1.
EEEE
indicates an overload when the item being
measured exceeds the capacity of the scale.
Immediately remove the overweight item to avoid
causing damage to your scale.
Note:
Clean the scale platform before each use.