Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
162
Function description:
If this menu is selected, the control panel menu will pop up. The user can set the operating system.
Parameter description:
None
3) System impedance
Function description:
Select this menu to set the system impedance. The system impedance must be changed in measurements of devices except those of
50Ω, such as waveguide devices.
Parameter description:
50Ω [0Ω-1kΩ].
4) User configuration
Function description:
If this menu is selected, the user can configure it. Configurable options include: "Enable touch screen", "Save calibration file in the current
time name", "Not automatically save after calibration", "Display marker on all the existing tracks", "Display limit test on all the existing
tracks", "Press the UP/DOWN key to change the marker point by point", "Install anti-virus software", "Multi-port calibration" and "Identify
port sweep state".
Parameter description:
None
5) Intermediate frequency selection
Function description:
Select this menu to select the IF, including the internal IF and external IF.
Parameter description:
None
6) Millimeter wave module configuration
Function description:
Select this menu to configure the millimeter wave module, including the model selection, port setting and frequency setting.
Parameter description:
None
7) Expansion to 16 ports
Function description:
Select this menu to expand the instrument to 16 ports.
Parameter description:
