Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
118
Click this menu, and the [Open channel] list will pop up, showing the closed channels. The user can select the channel to be opened (if
[New window] is selected, a new window will be created). Click [Apply] to open the channel and continue the above operation. Click [OK]
to exit the program.
Parameter description:
None
5.2.3.2.
Close channel
Function description:
Click this menu, and the [Close channel] list will pop up, showing the open channels. The user can select one channel, click [Apply] to
close the channel and then click [OK] to exit the program.
Parameter description:
None
5.2.3.3.
Select channel
Function description:
Click this menu, and the [Select channel] list will pop up, showing the existing channels. The user can select the channel to be activated,
click [Apply] to select the channel and then click [OK] to exit the program.
Parameter description:
None
5.2.3.4.
Copy channel
Function description:
Click this menu, and the [Copy channel] list will pop up. The user can select the target channel from the existing channels in the
drop-down menu of [Copy channel], click [Apply] to copy the channel and then click [OK] to exit the program.
Parameter description:
None
5.2.3.5.
Hardware setting>>
This menu is used for hardware setting. Click it to enter the menu of lower level, as shown in the following table.
Table 5.6 Hardware Setting
Menu
Path configuration
Graphic configuration
1) Path configuration
Function description:
Click this menu to configure the corresponding RF path.
