Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
103
a) Marker table
Fig. 4.33 Marker Table
The marker table is used to display the marker parameters,including:
Marker number
Reference marker (for relative measurement)
Stimulus value
Response value
b) Limit table
Fig. 4.34 Limit Table
The limit table is used to display, set and modify the limit test parameters, including:
Type (minimum, maximum or closed)
Starting and ending stimulus value
Starting and ending response value
c) Segment table
Fig. 4.35 Segment Table
The segment table is used to display, set and modify the segment sweep parameters, including:
Status (ON/OFF)
Starting and ending stimulus value
Number of sweep points
Power level (separately set for each segment)
Intermediate frequency bandwidth (separately set for each segment)
Sweep time (separately set for each segment)
2) Triggering of table display
Menu path: [Response] > [Display]. Point to the [Table] in the display sub-menu.
Click the table to be triggered in the sub-menu. Tick this item to display the table and clear it to hide the table.
