Tel: 886.2.2175 2930 Email: [email protected]
www.salukitec.com
116
None
5.2.2.
Trace
Press the [trace] key on the front panel or click the [trace] menu item on the user interface. The trace-related menu will pop up. Specific
items include: [New trace], [Delete trace>>], [Select trace], [Move trace], [trace title] and [trace maximization ON/OFF]. The specific
description of menu items is as follows.
Trace setting
The trace refers to a series of measurement data point. trace setting affects the mathematical operation and display of measurement
data. Only the active trace can be set. Click the corresponding trace state button to activate the trace.
5.2.2.1.
New Trace
Function description:
Click this menu, and the [New trace] dialog box will pop up. The user can select different trace types, including S-parameter (S11, S12,
S22 and S21) and receiver (R1, R2, A and B).
Parameter description:
None
5.2.2.2.
Delete trace...
This menu is used to delete the trace. Click it to enter the menu of lower level, as shown in the following table.
Table 5.5 Delete Trace
Delete trace 1
Delete trace 2
Delete trace 3
Delete trace 4
Delete active trace
1) Delete Trace 1-Delete Trace 4
Function description:
Click it to rapidly delete the existing data trace (the existing trace is highlighted if displayed and dark if deleted).
Parameter description:
None
2) Delete active trace
Function description:
