SAIC MG 6, Service Manual

Page: 97 / 357

Low Line Player
Radio Operation
Mode Selection
Press the SRC button to select radio as the source.
Band Selection
Repeatedly press the BAND button to select FM1, FM2,
FM AST, AM or AM AST frequencies.
Tune
There are 3 tuning modes, which are the search tuning,
manual tuning and pre-set tuning.
Search Tuning Mode
Briefly press or button, the radio automatically
searches the frequency range, looking for a radio station of
acceptable strength. Once a station is found, that station
will be played.
Manual Tuning Mode
Press and hold either of or button until the ‘MANU’
is display on the screen. Press either or button to
enter into manual tuning mode. 4 seconds after the last
button pressed, the system will leave manual tuning mode.
Pre-set Tuning Mode
Up to 30 radio stations can be stored (FM1, FM2, FM
AST, AM, AM AST). Press numbers 1-6 to select a stored
frequency.
Store Station
There are manual store and auto store modes.
Manual Store
• Press the BAND button and select the desired
waveband (FM1, FM2, AM).
• Use search, manual or pre-set tuning modes to turn to
the desired station.
• Press any Number button for more than 2 seconds.
The frequencies will be automatically stored (display the
stored frequencies and bands on the screen).
Note: Manual store overwrites any stations already
stored on the pre-set buttons.
79
3