SAIC MG 6, Service Manual

Page: 192 / 357

Seats & Restraints
Lap Belts
Please follow the instructions below to use the lap belts
correctly.
1 Hold the metal tab, pull the seat belt steadily across
your lap. Ensure there is no twist on the belt.
2 Insert the metal tab into the corresponding buckle
until you hear a "click" sound, which indicates the seat
belt is locked tightly.
3 To loosen the seat belt, press the red button on the
buckle.
IMPORTANT
• Before closing the door, ensure that the seat belt will
not disturb door closing, otherwise the seat belt or
the vehicle may be damaged.
• If you pull the seat belt across your body too fast,
the lap-shoulder belt may be locked. If this happens,
let the seat belt retract a bit to unlock it. And then
pull the seat belt slowly across your body.
• If it is difficult to pull the seat belt out of the guide
element, the seat belt maybe twist in side trim panel
due to fast retraction. You may hold the tab and pull
out the seat belt slowly, retract it in side trim panel
after smoothing it.
• Even if the seat belt is not completely smoothed, it
is still required to be worn during driving, but the
twisted part of the seat belt shall not contact the
passenger. When this happens, please go to an MG
Authorised repairer to repair the seat belt.
174