SAIC MG 6, Service Manual

Page: 47 / 357

Instruments and Controls
If an ABS fault occurs while driving, ABS operation will be
suspended, but normal braking will still be available. Seek
an MG Authorised Repairer at the earliest opportunity.
Brake System Warning - Red
This red warning light will illuminate for a few seconds as a
lamp check when the ignition is in position
Ⅱ
.
If the warning light remains illuminated after lamp check,
a fault with the brake system is indicated - the message
Brake Fail will appear in the message centre. Check the
brake fluid level (See ‘Brake Fluid’ in ‘Maintenance’). If the
light continues to illuminate, stop the car as soon as safety
permits and seek an MG Authorised Repairer urgently.
Drive by Wire Warning - Yellow
This warning light is used to indicate an engine operation
fault is detected by the engine management system. The
indicator illuminates as a system check when the ignition is
in position
Ⅱ
and should extinguish after a few seconds.
If a non-emissions related fault occurs while the vehicle is
being driven, the indicator will illuminate and the message
Check Engine will appear in the message centre. Seek
an MG Authorised Repairer urgently.
Malfunction Indicator Lamp Warning - Yellow
This warning light is used to indicate an emission related
fault is detected by the engine management system. The
indicator illuminates as a system check when the ignition
is in position
Ⅱ
and should extinguish when the engine is
started.
If an engine operation problem occurs while the vehicle is
being driven, the indicator will illuminate and the message
Engine Fault
will appear in the message centre. Seek an
MG Authorised Repairer urgently.
29
1