SAIC MG 6 Service Manual Download Page 298

Page: 298 / 357

Emergency Information

Note: Avoid placing wheels face down on the
ground - the surface may be scratched.

5 Fit the spare wheel and tighten the wheel bolts until

the wheel is seated firmly against the hub.

6 Lower the car and remove the jack, then FULLY

tighten the wheel bolts in a star sequence and mount
the relevant wheel bolt caps.

7 Finally, return the tools to the tool tray and the wheel

(face down) to the well in the loadspace floor.

Note: During replacing the tyre, please tighten bolts
in diagonal sequence for twice separately.

Note: Consult your MG Authorised Repairer or tyre
specialist for a replacement tyre, as soon as possible.

280

Summary of Contents for MG 6






































































































































































































































































































































































Search results

Summary of Contents for MG 6

Reviews:

Related manuals for MG 6

Brands by name

Popular brands

SAIC MG 6, Service Manual

Search results

Summary of Contents for MG 6

Reviews:

Related manuals for MG 6

Brands by name

Popular brands