SAIC MG 6 Service Manual Download Page 224

Page: 224 / 357

Seats & Restraints

• Fasten vehicle-approved ISOFIX child restraint systems

to the mounting brackets.

• When using ISOFIX mounting brackets for seat

mounting, universally approved child restraint systems
for ISOFIX may be used.

Note:

Refer

the

child

restraint

system

manufacturer's instructions for details.

• Fasten the Top-tether of the child restraint system

to the anchor at the rear of the rear passenger seat
backrest.

Note: When using child restraint with top-tether,
the top tether must be used with the top-tether
anchorage of rear seat.

Note:

Check the security of child restraint after

installation complete.

206

Summary of Contents for MG 6






































































































































































































































































































































































Search results

Summary of Contents for MG 6

Reviews:

Related manuals for MG 6

Brands by name

Popular brands

SAIC MG 6, Service Manual

Search results

Summary of Contents for MG 6

Reviews:

Related manuals for MG 6

Brands by name

Popular brands