SAIC MG 6, Service Manual

Page: 266 / 357

Starting & Driving
switch and the EPB indicator are illuminated, it
indicates that the EPB is applied.
• If the EPB failure warning lamp
P
in the instrument
pack illuminates, it indicates that a fault has been
detected. Please contact an MG Authorised Repairer
immediately.
Note: An audible motor noise may be heard when
applying or releasing the EPB.
Note: If the EPB is not used for a long period,
the system may perform an automatic inspection
operation that will emit an audible motor noise when
applied.
IMPORTANT
The EPB cannot be operated during the low battery
voltage condition.
Releasing the EPB
• Place the ignition switch in position II, depress the brake
pedal, and press the EPB switch.
• If the indicator in the EPB switch and the indicator
in the instrument pack are extinguished, the EPB is
(released).
Start Assist
The EPB can predict the driver's intention and
automatically release the EPB.
When you fasten your seat belt, start the engine, shift into
D/R/W/S gear, depress the accelerator pedal and ready to
start off, EPB will be automatically switched off.
Emergency Braking
Inappropriate use of the electric park brake
can lead to accidents and injuries. Do not
apply the electric park brake for vehicle
braking, unless in emergency.
During emergency braking using the EPB, DO
NOT insert or remove the ignition key, this
could result in serious injury.
In case of an emergency during vehicle driving, such as
failing to stop the vehicle with the brake pedal, you can
248