SAIC MG 6, Service Manual

Page: 333 / 357

Maintenance
Disconnect the negative (-) cable first and then the positive
(+) cable (when reconnecting, connect the positive cable
first and then the negative cable).
When lifting the battery from the car
，
keep the battery
upright at all times.
Make sure both the battery clamping plate and retaining
strap are fitted securely, this will prevent the battery from
moving in the event of an accident or sudden stop.
Note: To maintain the correct functionality of
Stop/Start
， ， ，
the battery sensor requires resetting
after battery replacement. Please consult an MG
Authorised Repairer to reset the battery sensor, it
takes 4 hours at least for the sensor to get the exact
status information of the battery. Failure to adhere
to the above will inhibit the stop/start functionality.
Used batteries can be harmful to the
environment ， must be disposed of using an approved
method . They should be recycled by a professional
company. Please consult an MG Authorised Repairer for
more details.
Battery Charging
Note: DO NOT charge the battery if it is suspected of
being frozen.
As the battery ages, it may not retain its charge as
effectively as when it was new.
Cars that are used
infrequently, or are used excessively for short journey
motoring, or operation in cold climates, may need the
battery to be charged regularly.
Pre Charging Battery Appearance Check ： ：
：
• If the shell is broken or there is a leak, DO NOT charge
the battery and replace it after finding the reason.
• If the terminal is broken, DO NOT charge the battery
and replace it after finding the reason.
• DO NOT attempt to charge a ‘bulging' or ‘distorted'
battery.
• Prior to charging ensure terminals are free from
corrosion, apply petroleum jelly to terminal to help
prevent corrosion.
Charging Notes:
• Always wear safety glasses when connecting or
disconnecting a battery charger.
315