SAIC MG 6, Service Manual

Page: 348 / 357

Maintenance
Light Alloy Wheels
To keep the shining of the light alloy wheels, schedule
maintenance is needed otherwise the salt for dissolving salt
and breaking ground trifling will have the light alloy eroded.
Be sure to use a non-acidic cleaning agents for cleaning.
Not use paint polish or other products containing abrasive
when maintain wheels. Protection layer if the paint has
been damaged (such as stoning damage) must be repaired
the site of injury immediately.
Protection Layer of Underbody
DO NOT have the catalytic purifier of the
exhaust or heat insulation plate coated with
the protective layer, due to a fire could be
caused when driving.
The underbody of the car coated with a special endurable
protective material, it can be avoid impact came from
chemistry and mechanism. However the damage to the
protective layer is unavoidable when driving, therefore
schedule checking for the protective layer coated on the
underbody and chassis is strongly recommended, especially
at the beginning and ending of the cold seasons.
330