SAIC MG 6 Service Manual Download Page 343

Page: 343 / 357

Maintenance

Directional tyres CANNOT be swapped from side to side.

Snow Chains

Unsuitable snow chains could damage the tyres, wheels,
suspension, brakes or bodywork of your car.

In use, always observe the following precautions:

• Fit snow chains to the front wheels only.

• The thickness of snow chains shouldn’t exceed 20mm.

• Always adhere to the snow chain fitting and retensioning

instructions and the speed limitations for varying road
conditions.

• DO NOT exceed speeds of 50 km/h.

• Avoid tyre damage and excessive chain wear by

removing snow chains when driving on snow free roads.

Note: If you drive on the snowy and icy roads, it is
recommended to use winter tyres. Consult an MG
Authorised Repairer for details.

325

Summary of Contents for MG 6






































































































































































































































































































































































Search results

Summary of Contents for MG 6

Reviews:

Related manuals for MG 6

Brands by name

Popular brands

SAIC MG 6, Service Manual

Search results

Summary of Contents for MG 6

Reviews:

Related manuals for MG 6

Brands by name

Popular brands