1. OUTLINE
IMR01N12-E7
6
Output logic function:
Output logic function allocates output functions to output terminals. Logic output such as
OR/AND
is available for event output. The following signals are allocated by output logic
function. Transmission output needs to be allocated separately. (Refer to P. 73 to 76.)
Input
Analog signal: Control output value (max. 2 points)
Digital signal: Event action state (4 points), Contact input state (max. 5 points),
Control area number (4 points)
Operation state (3 points): LOC/MAN/REM
Output
Computed output from OUT1 to OUT5.
ALM LED (1 point)
COMMUNICATION
Communication (optional):
Communication port is available to communicate with a computer or programmable
controller. The protocols available for a port is shown in the table below.
Interface *
RS-485, RS-232C, or RS-422A
Protocol *
RKC communication, Modbus
Open Network *
PROFIBUS, DeviceNet, or CC-Link
* Specify when ordering.
Infrared communication:
Infrared communication can be used when sending and receiving data between this
controller and the PDA installed with the RKCIR software.
