8. ENGINEERING MODE
IMR01N12-E7
53
Continued from the previous page.
To return to the SV setting & Monitor mode, press and hold the SET key for 2 seconds, or press the
shift key while pressing the SET key.
If the key is not pressed within 1 minute, the display will automatically return to the SV setting &
Monitor mode.
(P. 97)
(P. 97)
(P. 98)
(P. 98)
(P. 99)
F53
(AT1)
UP or DOWN
key
(Communication)
SET key
SET key
SET key
Communication
protocol selection
UP or DOWN
key
SET key
SET key
SET key
UP or DOWN
key
SET key
SET key
F10
(Screen configuration)
(SV)
Setting change rate
limiter unit time
Soak time unit
selection
SET key
SET key
SET key
UP or DOWN
key
(SV1)
SET key
SET key
UP or DOWN
key
(SV2)
Input 2_setting limiter
high
Input 2_setting limiter
low
SET key
SET key
SET key
UP or DOWN
key
(System information)
ROM version
display
Integrated operating
time display
SET key
SET key
SET key
Holding peak value
ambient temperature
display
UP or DOWN
key
SET key
SET key
Input 1_setting limiter
high
Input 1_setting limiter
low
SET key
(AT2)
Input 2_AT bias
Input 2_AT cycle
SET key
SET key
SET key
Input 2_AT differential
gap time
UP or DOWN
key
Input 1_PV transfer
function
Input 2_PV transfer
function
SET key
SET key
Input 2_AT action
SET key
(P. 93)
SET key
SET key
