Riken Keiki GD-3EC, Technical Manual

Page: 77 / 177

4. Installation 4-10 Mounting the splash guard
77 / 168
4-10 Mounting the splash guard
When using a silicone removal filter or activated carbon filter, fit the filter inside the splash guard before mounting
the splash guard.
1 When using a silicone removal filter or activated
carbon filter, remove the splash guard cover, fit the
filter inside the splash guard, and reattach the cover.
This step is required only when using a silicone removal
filter or activated carbon filter.
2 Mount the splash guard over the guard on the main
unit, then turn clockwise to secure into place.
Mount the splash guard securely by rotating clockwise
until it will not rotate any further.
Avoid rotating with excessive force.
*The diagram illustrates the SD-3. The mounting method for the remote sensor head (GD-3) is identical.
Filter
Cover
Guard
Splash guard