Riken Keiki GD-3EC, Technical Manual

Page: 128 / 177

7. Maintenance 7-5 Setting environmental settings 1
128 / 168
7-5 Setting environmental settings 1
The following items can be set in environmental settings 1:
Item No. Setting item Remarks
2-4 Environmental settings 1
2-4.0 Inhibit setting
2-4.1 Alarm setpoint setting
2-4.2 Alarm delay setting This is not normally used by the user.
2-4.3 Alarm pattern setting This is not normally used by the user.
2-4.4 Alarm setpoint limiter setting This is not normally used by the user.
2-4.5 Alarm type setting This is not normally used by the user.
2-4.6 Fault alarm pattern setting This is not normally used by the user.
2-4.7 Zero suppression value setting
This is not normally used by the user.
2-4.8 Zero suppression type setting
This is not normally used by the user.
2-4.9 Password
This is not normally used by the user.
2-4.A Date and time setting
7-5-1 Inhibit setting
Enabling the inhibit setting prevents alarms from being issued externally even when the gas concentration is
displayed in detection mode. This setting is primarily used when testing and maintaining the product.
The default setting is disabled.
1 Press the ▲ or ▼ key in maintenance mode to select
[2-4], then press the SET key.
2 Select [2-4.0], then press the SET key.
3 Press the ▲ or ▼ key to select [oFF] or [on], then press the
SET key.
Returns to the [2-4.0] display.