Riken Keiki GD-3EC, Technical Manual

Page: 52 / 177

4. Installation 4-4 Main unit installation
52 / 168
4-4-4 Attaching sunshade cover
Attach the sunshade cover to the main unit (SD-3/SD-3SC).
<Pole mounting (pole size: 50A (2B))>
1 Fit one U bolt around the vertical pole and through the
upper slots on the main unit. Secure with the chassis, two
washers, two spring washers, and two M10 nuts.
2 Fit the second U bolt around the vertical pole and through
the lower slots on the main unit. Secure with two washers,
two spring washers, and two M10 nuts.
3 Attach the sunshade cover, aligning it with the two lugs at
the top of the chassis.
4 Secure the sunshade cover in place by tightening the
knurled screws on either side of the cover.
*The diagram illustrates the SD-3. The mounting method for the SD-3SC is identical.
Vertical pole
Sunshade cover
Lugs
Knurled screw
Chassis
U bolts