Riken Keiki GD-3EC, Technical Manual

Page: 33 / 177

3. Product Configuration 3-1 Main unit and accessories
33 / 168
3-1-4 Standard accessories
Standard accessory Quantity Part No. Description
Control key
Varies
depending
on quantity
ordered.
4286 9200 80
Key used to control the
product
Operating lever ×1 2594 0481 90
Tool used when connecting
cable to terminal plate
Hex key wrench
(2 across flats)
Varies
depending
on quantity
ordered.
1510 5020 40
Tool used for tightening M4
hex socket set screws
Operating
manual
×1
NOTE
 The quantity of control keys and hex key wrenches included will vary depending on the quantity of
product units ordered.
1 - 10 units:
×1
11 - 20 units: ×2
21 - 50 units: ×3
51 or more units: ×4
CAUTION

Use the control key provided to operate the product. The product may not respond properly to commands
if an object other than the supplied control key is used.

The control key provided incorporates an extremely strong magnet. Holding the control key close to credit
cards, ID cards, or other magnetized products may corrupt data recorded on these objects.