RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
2-16
To Select the built-in Arbitrary Waveform
There are five built-in Arbitrary Waveforms and user-definable Arbitrary Waveforms
inside the Generator. To select one of them, following the instructions below:
Press Arb
Æ
Load, enter the interface shown below.
Figure 2-26 Operation Menu
Table 2-7 Selection Menu for Built-in Arbitrary Waveform
Instructions:
1.
When there is no waveform stored in the Non-Volatile Memory, the
Stored Menu and the Delete Menu will hide.
2.
When there is no waveform in the Volatile Memory, the Volatile menu will
hide.
Function
Menu
Settings Explanation
Built-in
Select one of the five built-in Arbitrary Waveforms
(See Table 2-8)
Stored
Select one of Arbitrary Waveforms stored in the
Non-volatile memory.
Volatile
Select one of Arbitrary Waveforms stored in the
Volatile memory. When a new waveform is
created, the old one will be erased.
Delete
Delete one of the Arbitrary Waveforms stored in
the Non-volatile memory. The five Built-in
Waveforms can not be deleted.
Cancel the current operation, and return to the
upper menu. (The rest are the same and will not
be covered)
