RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
4-6
Conflict Settings
Turned off infinite burst.
Infinite burst is allowed only when the source is external or manual. The upper limit
of the burst cycle is 50,000.
Trigger source changes to Ext/Manual.
Only when the External or Manual Trigger Source is selected, the infinite burst is
allowed.
Burst period increased to fit entire burst.
The PRI of Period is higher than that of the Burst Period. As long as the burst period
does not reach its maximum, the generator will increase the burst period to cater to
the need of the specific burst cycle or waveform frequency.
Burst count reduced.
If the burst period has reached its maximum, reduce the burst count to meet the
need of the specified waveform frequency.
Trigger delay reduced to fit entire burst.
Trigger delay will be reduced to fit the current burst period and burst count. Trigger
delay is the time between the time trigger is received and the start of the burst.
Sorry, unable to N-cycle burst with noise.
Noise cannot be used in the trigger burst mode; it can only be used in the gated
burst.
Triggered burst not available for noise.
Noise cannot be used in the trigger burst mode; it can only be used in the gated
burst.
Trigger ignored -OUTPUT is off.
When the OUTPUT is disabled, the Trigger Output will be disabled automatically.
Trigger output connector used by FSK.
If the FSK is activated and the Source is external, no “Trigger Output” is allowed.
Trigger output connector used by burst gate.
If the gated burst mode is activated and the burst is also activated, no “Trigger
Output” is allowed.
Frequency is set maximum for Arb.
The maximum frequency for the arbitrary waveform is 5MHz. when a waveform of
