RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
1-10
Figure 1-14
Noise Signal in the Menu Display Mode
As shown in Figure 1-14, the default signal parameters are: 5.0 V
PP
Amplitude and 0
V
DC
Offset.
6.
Press Arb button, and the waveform icon turns into Arb with an “Arb” typeface in
the state area. DG1000 Series Generator can generate repeatable arbitrary
waveform signals with at most 4K points and 3MHz frequency. By setting
Frequency/Period, Amplitude/ High Level, Offset/ Low level, arbitrary waveform
signals with different parameters can be generated.
Figure 1-15
Arbitrary waveform Signal in the Menu Display Mode
As shown in Figure 1-15, the default Exponential Rise Signal parameters are: 1kHz
Frequency, 5.0 V
PP
Amplitude and 0 V
DC
Offset.
7.
Press Count button, and the waveform icon turns into Arb with an “Count”
typeface in the state area. Select “Freq”, “Period”, “PWidth”, “NWidth”, the screen
will display corresponding measure result. Select “Setup” to set the parameters
of input coupling method, sensitivity, trigger level and high frequency on/off.
Figure 1-16
General interface of the counter
