Rigol DG1000 Series, User Manual

Page: 136 / 150

RIGOL
© Copyright
RIGOL
Technologies, Inc. 2007
User’s Guide for DG1000 Series
4-16
limit is -4.999,998 MHz.
Sweep Time upper limit = 500.00s
The Sweep Time upper limit is 500.00s. If the specified Sweep Time is greater than
500.00s, the system will adjust the Sweep Time to 500.00s automatically.
Sweep Time lower limit = 1.0ms
The Sweep Time lower limit is 1.0ms. If the specified Sweep Time is less than 1.0ms,
the system will adjust the Sweep Time to 1.0ms automatically.
Phase upper limit= +360.0º
The Phase upper limit is +360.0
o
. If the specified Phase is greater than +360.0
o
, the
system will adjust the Phase to +360.0
o
automatically.
Phase lower negative limit
＝
- 360.0º
The Phase lower negative limit is -360.0
o
. If the specified Phase is less than -360.0
o
,
the system will adjust the Phase to -360.0
o
automatically.
# of Cycles upper limit = 50,000 Cyc
The Cycle upper limit is 50,000Cyc. If the specified Cycle is greater than 50,000Cyc,
the system will adjust the Cycle to 50,000Cyc automatically.
# of Cycles lower limit = 1 Cyc
The Cycle lower limit is 1Cyc. If the specified Cycle is less than 1Cyc, the system will
adjust the Cycle to 1Cyc automatically.
Trigger Period upper limit = 500.00s
The Trigger Period upper limit is 500.00s. If the specified Trigger Period is greater
than 500.00s, the system will adjust the Trigger Period to 500.00s automatically.
Trigger Period lower limit = 1.0 μ s
The Trigger Period upper limit is 1.0 μ s. If the specified Trigger Period is less than
1.0 μ s, the system will adjust the Trigger Period to 1.0 μ s automatically.
Delay upper limit = 40.0s
The Delay upper limit is 40.0s. If the specified Delay is greater than 40.0s, the
system will adjust the Delay to 40.0s automatically.
Delay lower limit = 0.0000000000s
The Delay lower limit is 0.0000000000s. If the specified Delay is less than
0.0000000000s, the system will adjust the Delay to 0.0000000000s automatically
Load Impedance upper limit =10k Ω
The Load Impedance upper limit is 10k Ω . If the specified Load Impedance is greater